Home » VST Plugins » VST Effects » Surroundizer
Surroundizer
VST Plugins by AcousModules:
Surroundizer offers stereo to surround translation.
Common features:
* Activation and free 2D position of up to eight loudspeakers, compatible with all surround settings from 4.0 to 7.1, including true octophony (8.0).
* Mono or stereo input.
* Graphic 2D representation space.
* Connexions according to the ITU/SMPTE standard.
* Separated levels for each output channel.
* Variable mix of the three sections plus the reverberation.
* Individual spatial areas and amplitude curves for each section.
Three spatialization sections: Cinetic, Spectral and "LCRS".
Cinetic section:
* Analysis of the main frequency (pitch tracker) and the intensity (volume tracker) of the two input channels.
* Modulation of the X/Y position of the two inputs according to the analyzed signal values.
* Settings for the default center position, the amplitude of the movement and the smoothness.
* Each channel tracker can control the X or Y position of the two inputs.
* Manual mode for use like any surround module and host automations.
Spectral section:
* Division of the two inputs signals in four frequency bands with three variable crossover filters.
* Each frequency band can be freely positioned (and automated) inside the 2D space.
* Levels settings for each band / channel.
LCRS:
* Simulation of the old Prologic surround sound (5 channels only).
Plus:
* Stereo reverberation with spatial position of the two channels and the area expansion.
* Individual delay and phase settings for the four surround channels (5 to 8).
* Two parametric filters for the center channel (must be improved).
* Optional bass management for the fourth channel.
* Pre-assigned MIDI controllers for easy use with a control surface.
* 128 patches.
* Inline help.
The freeware version is limited to processing only one input.
Common features:
* Activation and free 2D position of up to eight loudspeakers, compatible with all surround settings from 4.0 to 7.1, including true octophony (8.0).
* Mono or stereo input.
* Graphic 2D representation space.
* Connexions according to the ITU/SMPTE standard.
* Separated levels for each output channel.
* Variable mix of the three sections plus the reverberation.
* Individual spatial areas and amplitude curves for each section.
Three spatialization sections: Cinetic, Spectral and "LCRS".
Cinetic section:
* Analysis of the main frequency (pitch tracker) and the intensity (volume tracker) of the two input channels.
* Modulation of the X/Y position of the two inputs according to the analyzed signal values.
* Settings for the default center position, the amplitude of the movement and the smoothness.
* Each channel tracker can control the X or Y position of the two inputs.
* Manual mode for use like any surround module and host automations.
Spectral section:
* Division of the two inputs signals in four frequency bands with three variable crossover filters.
* Each frequency band can be freely positioned (and automated) inside the 2D space.
* Levels settings for each band / channel.
LCRS:
* Simulation of the old Prologic surround sound (5 channels only).
Plus:
* Stereo reverberation with spatial position of the two channels and the area expansion.
* Individual delay and phase settings for the four surround channels (5 to 8).
* Two parametric filters for the center channel (must be improved).
* Optional bass management for the fourth channel.
* Pre-assigned MIDI controllers for easy use with a control surface.
* 128 patches.
* Inline help.
The freeware version is limited to processing only one input.
System Requirements:
Windows All
More Software by AcousModules
Software Info:
- Developer: AcousModules
- Downloads: 192 time(s)
- Added: January 08, 2011
- Category: VST Plugins
- Sub Category: VST Effects
- Rating:
9/10 3 Voters
- License: Free!!
Rate This:
(Open in new window)
